Amplification
The built-in amplifiers are coupled to the respective drivers as directly as possible so that remote amplifier units do not compromise the advantages of active technology. One 500 Watt amplifier is assigned to each of the 12" woofers, while 250 Watt units are used the other bands of the frequency range. This main monitor combines very high accuracy exceptional power: SPL peaks far beyond 130 dB are produced without any compression or harshness. The S6X is an excellent choice for large control rooms and film or sound studios.
Control panel
In addition to the input sensitivity that can be adapted in the range of ±10 dB, there are four other level controls that affect the individual amplifier modules. Shelving filters at both ends of the frequency spectrum and three fully parametric equalizers help compensate for standing waves in the control room. The EQs can be inserted separately or grouped so their effect can be directly evaluated.
In large film score mixing rooms, there may be a need to simulate theater sound. Based on the ISO 2969 standard, the Dolby® X-Curve is used to achieve this. This filter engages a 3 dB per octave roll-off starting at 2 kHz. Below the front input jack is a selector switch that activates this filter, eliminating the need for external processing during the film mix. In addition to the rear input there is an additional switchable XLR input on the front panel, allowing work with the monitor regardless of set-up.
Basic technical data at a glance:
- Frequency response: 23Hz-50kHz
- Drivers: 2 x 12" (LF) 2 x 7.5" (MF) 2 x X-ART (HMF) 1 x X-ART (HF)
- Amp: 2 x 500W (LF) 2 x 250W (MF) 1 x 250W (HMF) 1 x 250W (HF) RMS
- Max SPL @ 1m: ≥131db
- Weight: 97kg
- Dimensions: 720 x 940 x 490 (mm)
- Input: Analog XLR.
- Input: Optional Digital AES/EBU, SPDIF available
- Comprehensive front panel control + Dobly® X Curve
- Warranty: 5 years