(1)
In-house simulated tweeter with alloy fabric dome, robust metal grille and magnetic shielding
- Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion
- Low-distortion high frequency reproduction
- Grille protects against mechanical damage
(2)
Rotatable elliptical Mathematically Modelled Dispersion™ (MMD™) waveguide
- Smoother off -axis response
- More forgiving of diverse acoustical environments
Wide horizontal dispersion
- Freedom of movement across the mixing console
Narrow vertical dispersion
- Reduces reflections off the mixing console
(3)
Two-color + dimmable Neumann logo
- Displays operation status and activation of the extensive protection system
- Dimmable for low lighting level conditions or behind the screen applications
(4)
In-house simulated, neodymium magnet, fabric dome, midrange driver with optimized low stray magnetic field
- Dedicated driver reproduces important midrange frequencies, which is especially important for speech and vocals
- Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion
- Low-distortion midrange reproduction
- Light-weight dome has better transient response and less breakup modes than cone designs
- High power magnet reduces harmonic and intermodulation distortion
(5)
In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor™ (ELFF™), magnetic shielding and flow optimized die cast basket
- Damping of break up modes brings low distortion at high sound levels
- Linear pistonic motor gives a very low harmonic distortion even at high excursions
- Reduced air noise and improved rocking modes
(6)
Large high-capacity flow-optimized bass reflex ports with pipe resonance damping
- Fast bass transient response
- Reduced bass compression at high output levels
- No coloration from organ pipe resonance
- Can be flush mounted
(7)
Computer mechanically modeled three-way cabinet design using Low resonance Integral Molding™ (LRIM™) materials
- No standing wave resonances inside cabinet
- Reduced intermodulation distortion in midrange for a more transparent sound
- Reduced cabinet resonances
(8)
4-position bass, low-mid and treble acoustical controls
- More control in diverse acoustical environments
- Repeatable acoustical settings after moving loudspeakers
(9)
Parametric equalizer
- More control in diverse acoustical environments
- Bypassable if not needed
- Three frequency ranges gives very fine control of equalization
(10)
Wide range input gain and output level controls
- Easier interfacing with signal sources
(11)
Display dimmer
- For low lighting level conditions or behind the screen applications
(12)
XLR electronically balanced analogue input with ground lift
- Standard interfacing to professional equipment
- Reduced noise in electrically noisy environments and over-comes ground loops
(13)
Universal dual (bass and mid/treble) switched-mode power supplies (100 … 240 V)
- One version works in any country and robust to poor quality mains supply
- Dual supply improves transient response
(14)
Fully documented extensive mounting hardware range
- More flexibility in mounting cabinets in more diverse locations and backwards compatible to previous products
- Easy advanced planning for installations
(15)
Electronics panel with generously dimensioned integrated Accelerated Heat Tunneling™ (AHT™) heat sink
- Improved heat dissipation leading to increased electronics reliability
Installation flexibility
- Remoteable electronics (REK 4) for ease of installation, less cabling, and convenience of use
(16)
Powerful amplifiers with large headroom and overheat limiting
- Improved transient response
- Assured reliability and safety
Separate fast acting thermo limiters for woofer, midrange and tweeter to protect the voice coils and power amplifiers
- Woofer soft clip and excursion limiters
- Increases system reliability
- Allows extraction of the maximum performance from the system
MORE FEATURES
Production consistency due to individual hand alignment in final testing
- Any KH 420 is “pair matched” to any other KH 420
Optional robust metal grille
- Can be used, if required, to protect the drivers
Free field frequency response ±6 dB | 25 Hz … 22 kHz |
Free field frequency response ±3 dB | 26 Hz … 22 kHz |
Free field frequency linearity deviation between 100 Hz and 10 kHz | ± 1.2 dB |
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced | ±0.78; ±0.36; ±0.22 dB |
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) | <20 dB(A) SPL |
Sine wave output with a THD < 0.5 % at 1 m in half space | 95 dB SPL (>100 Hz) |
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 116.4 dB SPL |
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 122.4 dB SPL |
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) | 109.9 dB SPL |
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions | 109 dB(C) SPL |
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) | 103 dB(C) SPL |
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) | 109 dB(C) SPL |
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) | 90 / 96 dB(C) SPL |
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) | 90 / 96 dB(C) SPL |
Analog input(s) | XLR: analog electronically balanced |
Analog input impedance | >14k Ohms |
Max. input level | +24 dBu (DIM 1: 18 dBu for analog delayed) |
Common mode rejection ratio (CMRR) | >56 dB @ 15kHz |
Input gain control (sensitivity) | 0 dB ... -15 dB |
Output level control (output level in 1 m based on 0 dBu input level) | 94; 100; 108; 114 dB SPL |
Controller design | Analog; active |
Crossover frequency | 570 Hz and 2.0 kHz |
Crossover slope | 24 dB/oct; 4th order |
Equalization: Bass | 0; -2.5; -5; -7.5 dB |
Equalization: Mid | 0; -1.5; -3; -4.5 dB |
Equalization: Treble | +1; 0; -1; -2 dB |
Equalization: Parametric EQ: Gain | '+4 ... -12 dB |
Equalization: Parametric EQ: Frequency | Bypass, 25 ... 80 Hz; 50 ... 160 Hz; 100 ... 320 Hz |
Equalization: Parametric EQ: Q | 1 ... 8 |
Protection circuitry | Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters. Amplifier overheat. |
Infrasonic filter: frequency; slope | 9 Hz; 18 dB/oct. |
Display: On; Normal Operation | Neumann logo “White” |
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute | Neumann logo “Red” |
Display Brightness | White: 100%/60%/30%/off; Red: 100%/60%/30% |
Output power woofer amplifier (THD+N with limiter deactivated: 10%) | 330 W |
Output power midrange amplifier (THD+N with limiter deactivated: 10%) | 140 W |
Output power tweeter amplifier (THD+N with limiter deactivated: 10%) | 140 W |
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) | 295 W |
Output power midrange amplifier (THD+N with limiter deactivated: 0.1%) | 130 W |
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) | 130 W |
Mains Power Supply: input voltage; frequency | 100-240V; 50/60 Hz |
Power consumption (230 V / 100 V): Idle | 60 W (+5W when DIM 1 fitted) |
Power consumption (230 V / 100 V): Full output | 800 W |
Cabinet material | Wood cabinet, polyurethane waveguide, aluminum electronics panel |
Cabinet surface finish; color (front / back) | Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
Operating conditions | +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
Transport/storage conditions | -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
Woofer | 265 mm (10") with magnetic shielding |
Midrange | 75 mm (3") with magnetic shielding |
Tweeter | 25 mm (1") with protecting black metal grille |
Mounting points | 8 x M5 on rear panel |
Product dimensions (height x width x depth) | 645 x 330 x 444 mm (25 3/8" x 13" x 17 1/2") |
External net volume | 93 liters |
Product weight | 35.0 kg (77 lbs 3 oz) (+ 100 g (3 oz) with DIM 1 fitted) |
Cabinet weight when electronics remote located | 30.3 kg (66 lbs 13 oz) (+ 100 g (3 oz) with DIM 1 fitted) |
Packed dimensions (height x width x depth), mm (inches) | 775 x 610 x 590 mm (23 1/4" x 15" x 14 1/8") |
Packed weight | 41.0 kg (90 lbs 6 oz) |
Packed cube | 0.279 m³ |